- Straight coupler (unwired)

- Wired Feed Connector (c/w approx 100mm of cable for a single end feed)

- Wired Joining Coupler - for joining 2 pcs - (c/w approx 100mm of cable for a single end feed)

- 90˚ Corner Coupler 

Note - these are only compatible with our own LED Tape. Pliers required for crimp installation - firm crimp required, if not firm will result in poor connection, flickering etc. Not reusable - once used they cannot be reused and the LED tape will need to be cut to remove. 

5Amp max load - @24V thats 120W - DO NOT CONNECT multiple excessive long runs as well overheat/lead to failure.