- Stock: Out Of Stock
- Model: DECKING3M-CLEARANCE
Available Options
This is clearance / damaged stock - 90% of which the stock has been damaged at the very end of the board and can simply be cut off to make approx 2.5m useable board - in insome cases both ends.
TO ORDER A SAMPLE OF THIS ITEM - CLICK HERE
A double sided reversible hollow composite grey board with a low risk of slip groove surface on both sides (5mm grooves one face / 17mm grooves on the reverse), and non-non stain, complete with concealed hidden fixings for a barefoot friendly surface (Barefoot-friendly; slip & splinter resistant) looking contemporary and easy to install / clean as well as considerably longer lasting, low/no maintenance alternative to traditional timber decking (no need to stain or seal) & Mould / moisture resistant
Board Length: 3000mm
Board Width: 140mm Lined Grooved / 146mm Wood Grain Effect
Board Thickness: 25mm
Each board weighs approximately 8.1kg - Price is per board
Fixing joist center span: (400mm / 90" recommended max)
Material: Polyethelyne
Fire classification of construction products: BS EN 13501-1 Class B
Premium secret hidden concealed stainless steel fixing clips sold separately for a barefoot friendly surface (not cheap plastic ones which rust, crack, move, with stainless steel concealed hidden decking board fixing clips require 4mm - 4.5mm screw sold separately) - add on below - we recommend 20 per square m (8 per board)
Approx 2.3 Boards is 1 sq m. This is APPROX
Each 3m board covers 0.42 sq m.
You need 7.2 linear metres to cover 1 single square m.
1 Square m requires to x 2.5 boards approx.
Simply multiply the number of square m you require by 2.5, So if you require a composite plastic decked terrace area to cover 3m x 3m = 9 sq m 2.5 = 22.5 boards in total.* We always recommend adding on 10% extra for cuts/wastage etc. so, in this case, we would recommend 25 boards as we can't be held liable for shortages in ordering/extra delivery charges or variations in colour from batch to batch due to the manufacturing process. Specification subject to change without prior notice, please check before ordering.
Note: To allow for expansion and maintenance, please be sure to keep a 30mm expansion gaps between all sides of your deck and any obstructions such as walls, fences, etc.
NOTE: Due to manufacturing tolerances with regard to batch variation, we recommend ordering all material for a project at the same time, from the same batch, as we cannot be held responsible for any variation that occurs between batches.
