MDF Door Liner (CLEARANCE / DAMAGED / SECONDS) FD30 Primed Door Frame Lining Set

THESE ARE CLEARANCE ITEMS / SECONDS WHICH MAY HAVE BEEN COSMETICALLY DAMAGED (MOST COMMONLY THE ENDS OF THE LEGS) DURING TRANSPORT. IN 99% OF CASES, THE ENDS ARE TRIMMED/CUT DOWN ANYWAY TO SUIT THE HEIGHT OF YOU DOOR/INSTALL - IN SOME CASES MAY BE DAMAGED ON THE SIDE OF THE PROFILE BUT AGAIN, ONNLY COSMETIC - THIS IS A UNFINISHED / PRIMED PRODUCT AND WILL NEED FILLING/SANDING/PAINTING - STRUCTURALLY SOUND. LIMITED STOCK

MDF Door Liner - Primed Door Frame Lining Set c/w Optional Grooves for Fire Intumescent Door Strips - FD30 30-Minute Fire Rated MDF White Painted Primed Door Liner

• Optional Standard white primed MDF door liner set
• Full door liner set complete with 2 Legs @ 2100mm, 1 Head at 1000mm 
• Supplied complete with 32mm x 12mm (or 25mm jamb for FD30 fire rated model) Door stops (door jamb strips / slamming strips)
• Choice of 95mm, 108mm, 131mm, 150mm wide - door liner is 27mm thick 
• Moisture-resistant MDF with a density 620kgM3 for for the standard door frames & 720kgM3for the FD30 Models, the linings are produced defect-free - no knots and no warps
• Pre-cut trench (the notched part of the legs where the head slots in) 15mm from edge of legs, can be adjusted but cutting the legs down accordingly
• Primed - 2 coats of white-primer applied - ready for directly undercoating / top coating reducing the installation cost and time
• Head can be cut down to fit a number of door sizes from common sizes such as 686mm, 762mm, 840mm, 926mm up to a maximum door size of 980mm  wide x 2040mm high
• Choose between standalone door frame lining set or FD30 fire door liner set with 10mm wide x 4mm deep to accomodate fire door intumescent strips (not supplied / sold separately)